Saturday, June 12, 2010
Wells are treated yearly with acids to help them flow better. Normally, after the growing season, a treatment will be made and left to sit for a week or longer. The well will then be flushed and re-treated until it works without problems.
To simulate what would go on down in a well, we treated a couple buckets with an acid fertilizer with a pH of 0.5 at a 3% solution. We did the same with an EM•1® treatment at 3% and let pipes from a well sit for one month and observed what happened to the metal. Remember, EM•1® has a pH of 3.5, so it is acidic too!
The pipe on the left is the one treated with EM•1®. The pipe on the right is the one treated with the acidic solution.
This photo on the right shows the pipe that was treated with EM•1® after it is washed with fresh water.
Which would you rather have? There will always be some residual acid in the well when treated with an acid. Over time the pipes will completely corrode and need replacement. We could deduce from this simple experiment that using EM•1® as a well treatment would not only remove the rust, but also protect equipment, dramatically extending its lifespan.